通用banner
Current location: Home > News > Industry News

You know width, do you know width?

2021-08-17 09:20:51
second

Width is the actual width of the fabric, the distance between the outermost warps on both sides of the fabric, also known as the width of the door. The gate width is also called bufeng, Bufeng is the name of Guangdong, the gate width is the name of the Yangtze River Delta.


I. How to understand the width of the fabric?


Width is the actual width of the fabric, the distance between the outermost warps on both sides of the fabric, also known as the width of the door. The gate width is also called bufeng, Bufeng is the name of Guangdong, the gate width is the name of the Yangtze River Delta. This next know, used to express the width of the fabric there are three main domestic: door width, width, cloth seal. In general, the width of the fabric is expressed in inches or centimeters.


The cloth sold by the general textile factory is the edge to side width, and the clothing factory will require to know the cutting width of the fabric when using the fabric. The cutting width is the available range of the fabric in the processing and production.


Cut width = edge to side width -2 inches.


Wide is to point to cloth is 2.3~2.35 meters wide, narrow range points to cloth is 1.5~1.6 meters wide. Generally speaking, the sheet that wide make and quilt cover did not join together, metropolis indicates in the eye-catching place of bag "full width", narrow range must join together on sheet and quilt cover. Most people like the wide (especially the suffering of the elderly, because the stitching always let people have a lack of food and clothing economic tension feeling. But I have seen a lot of floral and chequered bed pieces that are very English manor style, very beautiful), the cost of the same quality of wide cloth may be higher.


Two, material width size of the influence factors


1. The thicker the yarn count, the larger the width of the door will be;


2. The heavier the finished product, the smaller the door width will be;


3. The larger the horizontal shrinkage, the larger the door width will be; (This effect is usually very small, only about 2-3cm)


4. The needle in the structure will increase the width of the door, and the flat needle will make the width of the door smaller.


At present, the common standard on the market for fabric width is 36 inches, 44 inches, 56-60 inches and so on, respectively called narrow, medium and wide, the fabric higher than 60 inches is extra wide, generally called wide cloth, today the width of China's extra wide fabric can reach 360 cm.


Label

Recent:

Tel:0311-87877888 / 0311-87035555 / 13831145889 / 15831121695

Fax: 0311-87810345 Email:duwei@boshitex.com

Add:2309 Shangde Plaza, No. 8 Kangle Street, Xinhua District,Shijiazhuang City, Hebei China

Technical Support:ronglida.net.cn  ICP15019912-2

Copyright © Hebei Baosheng Textile Co., Ltd.All rights reserved Record number: ICP15019912-2 Service support:ronglida.net.cn
  • Home
  • Tel
  • Top